Fazer D2 Toyota 86 GT Tuned Drift 1/10 RTR Kyosho

An all-new, high-performance drift platform with redesigned electronics makes the FAZER D2 the new benchmark for radio-controlled drifting.

The FAZER Series Readyset is ready for action right out of the box: simply charge the battery and insert the batteries into the transmitter. The highly anticipated FAZER D2 rear-wheel drive model is here! Rear-wheel drive (RWD) is the standard configuration for current 1/10 scale RC drift cars and glides down the road under heavy countersteer like a true drift machine. With its rear-wheel drive chassis, the FAZER D2 benefits from different weight distribution and suspension than the standard FAZER, as well as a receiver with an integrated gyro that automatically controls countersteer for optimal sliding. The gyro controls the steering and throttle, allowing beginners to drive like a pro. The chassis also incorporates other modern RC drift components, such as long suspension arms and an uprated motor for easy handling and setup. Although this FAZER comes as a Readyset kit, you can modify and upgrade parts to customize the D2 like a real RC car. For the ultimate drifting experience, this model is equipped with the Kyosho ultra-scale body and a variable wheelbase allowing for the installation of different body styles. Traditionally, 1/10 scale drifts are reserved for experienced drivers, but the FAZER D2 complete Readyset kit gives you the thrill of drifting. The body

Kyosho 's meticulously crafted "ULTRA SCALE BODY" faithfully reproduces every detail of the body, including headlights, bumpers, and mirrors, to create a realistic, show-worthy model. The "ULTRA SCALE BODY PLUS" body goes even further by eliminating the need for mounting holes in the polycarbonate body.

Fully assembled 1/10 scale EP electric drift car, delivered as a Readyset kit. 4 AA batteries are enough for the transmitter and a battery with charger for the chassis. The body is painted with stickers and the radio control system is pre-installed, allowing you to drive it right out of the box.

The new RWD chassis, optimized for drifting, is equipped with a steering and throttle gyroscope for easy and accessible control for all.

Plastic drift tires are included as standard and provide an optimal balance between sliding and control.

The new KRG-331D receiver with integrated gyroscope and KS4072-06W servo is included.

The variable wheelbase allows the fitting of most bodies of the FAZER series.

The battery holder fits various sizes of battery packs, allowing the mounting of most standard RC car battery packs.

Many optional parts are available for tuning and customization.

The all-new, drift-specific RWD chassis includes a pre-installed radio-controlled system and a receiver with an integrated gyroscope. The suspension and engine mount are specifically designed for drift performance.

The GT86 is the European version of Toyota's FR "86" sports car, released in 2012, which inherited the name from the AE86, which became popular in the 1980s. This model has been modified with a carbon hood and a rear spoiler, among other aerodynamic tuning improvements.

The wheels faithfully replicate the RAYS TE37V, a popular choice in various real car categories.

The long-range double wishbone front suspension provides ample steering angle with adjustable caster, roll center and other geometry.

The high mounting position of the motor induces moderate body roll. An easy-to-use G22 brushed motor is supplied as standard, with a gear case to prevent dirt, etc., from interfering with the transmission.

The motor mount eliminates the need for delicate gear backlash adjustment. The gear ratio can be changed through the oblong hole that fits Kyosho 48P 16-37T sprockets.

The new KS4072-06W servo provides ideal steering characteristics for drift driving and works in combination with a newly developed gyro unit that produces optimal countersteering control.

Equipped with a new KRG-331D receiver incorporating a gyroscope optimized for drift driving. The gyroscope regulates the steering and throttle (speed regulation), and the gain (sensitivity) of each is adjustable using a dial.

The electronic speed controller (ESC) is mounted at the rear of the car to optimize weight distribution when drifting. It is secured in a special removable bracket by a single screw for easy maintenance.

The resin main chassis is divided into front and rear sections, and the connection points can be modified to adjust the wheelbase to suit the body fitted.

The newly designed concealed body mounts mean that the mounting posts and pins do not protrude outside, allowing for a more realistic appearance of the exquisite ultra-scale bodywork.

The wheel hubs are adorned with dummy brake calipers and discs, significantly enhancing the car's appearance. The rear drivetrain uses a live axle without a differential for a smooth ride.

Front and rear lights compatible with the LED headlight unit 97054, sold separately. Installing the LED headlight unit transforms your vehicle into a real car;

Technical characteristics of the Fazer MK2 chassis:

- Length (body included) 441 mm
- Width (bodywork * Excluding mirrors) 208 mm
- Width (chassis) 208 mm
- Height 136 mm
- Frame height 12 mm (approx.)
- Wheelbase 260 mm (240-273 mm ※Adjustable)
- Track (Front) 172 mm
- Track (Rear) 180 mm
- Gear ratio 9.1:1
- Track (Front/Rear) φ63 × 24 mm
- Weight 1,450 g
- G22 engine
- Syncro KT-231P+ R/C System

Kit contents:

● Car assembled and radio installed
● Painted and decorated bodywork
● Syncro KT-231P+ Transmitter
● Cross wheel wrench

Necessary equipment (not included):

● 4 x AA batteries for the transmitter
● Propulsion battery (7.2V Ni-Mh or Li-Po 2S) DEAN socket
● Battery charger