Reference: P-AXEROTOR
Brand: DIY
Full rotor axis with bearings and assembled guide - Pioupiou
Full rotor axis with bearings and magnet mounted for PiouPiou connected anemometer.
Banner
Piou-piou connected anemometer with free and public data, spare parts, after-sales service, complete kits. Ideal for aeromodelling, ULM, aviation, paragliding, hang gliding fields. Or any other site whose remote connected weather is important.
There are 26 products.
Reference: P-AXEROTOR
Brand: DIY
Full rotor axis with bearings and magnet mounted for PiouPiou connected anemometer.
Reference: MWI-SF-RC1-C05
Brand: Barani Design
MeteoWind special version OpenWindMap.Ultra-sensitive sensor to low winds.With our MeteoWind IoT Pro weather station you will have access to the live wind conditions of the spot with readings every 10 minutes. The beacon comes with 1 year Sigfox connection provided by OpenWindMap.- Sigfox Communication (1 year included), data that can be consulted via the...
Reference: P-RLTSAXE
Brand: DIY
Vertical axis rolls for PiouPiou connected anemometer.
Reference: 2015120401
Brand: Barani Design
Set of 3 original cups for MeteoWind sensor from Barani Design.
Reference: OWM-ANTENNE
Transmitting antenna for Arduino MKR Fox Board 1200 connected anemometer OpenWindMap.
Reference: OWM-WINDBIRD
Brand: DIY
Please note that this item is on hold. Delivery at the beginning of February. WindBird Connected Anemometer Sigfox OpenWindMap. Replacement tag and improvement of the PiouPiou. - Sigfox communication (20€ TTC/year to be subscribed directly to OpenWindMap), data can be consulted via the OpenWindMap network.
Reference: P-COQUE
Brand: DIY
Complete shell for connected anemometer PiouPiou.
Reference: 321-7324
Acrylic coating – APLAPL is a transparent, flexible and quick-drying acrylic compliant coating used for the protection of electronic circuits.
Reference: P-COQUEINTER
Brand: DIY
Full shell with switch for PiouPiou connected anemometer.
Reference: OWM-ARDUINO
Arduino MKR Fox 1200 board, registered exclusively on the OpenWindMap network.Supplied with an 868MHz dipole antenna.
Reference: P-SUPPORT
Brand: DIY
Support base for PiouPiou connected anemometer.
Reference: P-AXE
Brand: DIY
Vertical metal axis for PiouPiou connected anemometer.
Reference: P-EQUILIBREUR
Brand: DIY
Vertical balancer option for PiouPiou connected anemometer.
Reference: OWM-ANEMO-LOWCOST
Brand: DIY
Kit to mount DIY Anemometer Arduino connected Sigfox OpenWindMap. Attention: kit to assemble fully delivered as in the 1st photo. Here is a connected anemometer allowing a low-cost alternative to the current beacons on the marked. You will have access to the live wind conditions of the spot with a reading every 10 minutes. The entire kit is delivered to...
Reference: P-ETRIER
Brand: DIY
Fixing stretch with screws for PiouPiou connected anemometer.
Reference: OWM-QUEUE
Brand: DIY
Tail with antenna for connected anemometer PiouPiou.
Reference: OWM-DAVIS6415
Anemometer - weather vane Davis Instruments.Measurement of wind speed and direction without mechanical parts thanks to ultrasonic measurement technology.Equipped with a 2 meter cable.Opportunity having very little use, for tests only. Delivered in its original packaging.1 year warranty.
Reference: OWM-CARTE
Brand: DIY
Electronic board for Winbird connected anemometer.PiouPiou V1 compatible.
Reference: P-CAPTEURVIT
Brand: DIY
Speed sensor for PiouPiou connected anemometer.
Reference: P-SAV
Brand: DIY
On request, repair your PiouPiou connected anemometer.
Reference: OWM-PILE
Brand: DIY
Pile for connected anemometer PiouPiou new.