Banner
There are 28 products.
Reference: ROC005-3
Brand: Roc Hobby
FMS proposes wing flying high performance foam of EPO under the ROC Hobby brand.Speed greater than 135 km/h!
Reference: HBZ7980
Brand: Hobbyzone
Here is the latest model in the HobbyZone FireBird DELTA RAY in BNF version range.Finally a flying wing within the reach of beginners through the stabilisation SAFE system. Its battery Li - Po 1300mA ensures great autonomy. Ready to apairer with a spektrum remote.
Reference: 209893
Brand: Torcster
Pre-assembled. Paste the wings, control surfaces and the canopy, set the control surfaces, set up the transmitter and flight battery, completed! Very fast: 140.6 km/h (measured with a UniLog, low tolerance of 0,5 km/h) in horizontal flightContents of the kit: Motor & regulator: Brushless rotating Bell with 20 amp controller with BEC function taken...
Reference: 210057
Brand: Torcster
Flying wing laser cutting in EPP printed.Simple in design by precision laser production.Canopy with Velcro for quick replacement of the battery.Gliding with the motor off flight possible. Content: Popwing 1300 mmEngine: AS2216 1250kvController: 30A Jack DEANServos: 2 x TS017Propeller: GWS 9 x 5 HDSpecifications: Wingspan: env 1300mmLength: approx....
Reference: 210981
Brand: Torcster
Flying wing in PPE printed laser cutting.Simple in design by precision laser production.Canopy with Velcro for quick replacement of the battery.Gliding with the motor off flight possible.Content: Popwing 900 mm Engine: AS2208 1250kvController: 20A taken DEANServos: 2 x TS08Propeller: GWS 9 x 5 HDSpecifications:Wingspan: env 900mmLength: approx. 575mm...
Reference: 209892
Brand: Torcster
At assemble. Flight performance breathtaking! Directed EPO foam, very resistant to crash Locking of the canopy by magnet Very fast: 140.6 km/h (measured with a UniLog, low tolerance of 0,5 km/h) in horizontal flightContents of the kit: Cell accessories to mount and complete. Electronics not included. Technical data: Wingspan: 800 mm Load allaire: 28.9...
Reference: 210474
Brand: Torcster
Flying wing laser cutting in EPP printed.Simple in design by precision laser production.Canopy with Velcro for quick replacement of the battery.Gliding with the motor off flight possible. Content: Popwing 1300 mmSpecifications: Wingspan: env 1300mmLength: approx. 390mmTakeoff weight: 448g Recommended Accessories: Engine: AS2216 1250kvController:...
Reference: 211006
Flying wing NEPTUNE 2 EPO PNP TechOne HobbyNeptune II delivered EPO flying wing assembled with motor and ESC Brushless, servos. -Wingspan: 1000 mm-Length: 523 mm-Weight in flying order: 550-570g-High speed of flightContent: -1 wing flying Neptune II in EPO-1 Brushless AS2212 KV2280 Brushless motor-1 40A Brushless controller-2 micro - Servo 9g-1 propeller...
Reference: 0704004Y
Flying wing Sport POPWING TechOne Hobby PNP PNP versionThe flying wing Sport Popwing in EPP comes in a kit with Brushless motor and controller Brusless servo.Features: -Wingspan: 900 mm-Length: 485 mm-Flight weight: 340 to 360gContent: -1 wing Sport flying, Popwing in EPP-1 Brushless AS2208 KV1370 Brushless motor-1 20A Brushless controller-2 micro - servo...
Reference: EFL11075
Brand: E-flite
The Convergence vertical takeoff plane has a simple design with a wing delta and three Motors Brushless - both engines turning on the wings and a fixed rear engine. This model is even ready to receive a FPV equipment with integrated racks to accommodate a camera and a video transmitter. Required elements: PNP Transmitter, 6 channels minimum Receiver 6...
Reference: EFL11050
Brand: E-flite
The Convergence vertical takeoff plane has a simple design with a wing delta and three Motors Brushless - both engines turning on the wings and a fixed rear engine. This model is even ready to receive a FPV equipment with integrated racks to accommodate a camera and a video transmitter. Required elements: Basic BNF Transmitter, 6 channels...
Reference: EFL11150
Brand: E-flite
The flying wing Opterra 2 m is lightweight construction, its large wing surface and exceptional aerodynamics make it very versatile. You can do it all: aerobatics or gliding, you choose. You can even discover new sensations with the FPV flight if you have a camera GoPro Hero 3, Hero 4 or an equivalent and so save your flights while flying your model....
Reference: EFL1850
Brand: E-flite
The X-green VTol from E-flite is a revolutionary flying wing for a take-off and vertical landing. This wing is very easy to take in hand with 3 modes of flight: In mode multirotoryou will fly as well as with a classic multirotor vertically In stabilized flight modeyou will fly in a classical way with this flying wing and you can use SAFE mode in case of...
Reference: EFL1800EU
Brand: E-flite
The X-green VTol from E-flite is a revolutionary flying wing for a take-off and vertical landing. This wing is very easy to take in hand with 3 modes of flight: In mode multirotoryou will fly as well as with a classic multirotor vertically In stabilized flight modeyou will fly in a classical way with this flying wing and you can use SAFE mode in case of...
Reference: F01
Brand: RC Factory
Crack WING "FUN series" Span: 750 mm Length: 340 mm Flight weight: 90 g Engine: 20 - 60W Regulator: 6-12A Servo: 2 x 4-6 g Battery: 250 2S Propeller: 6 x 3 - 7x3.5
Reference: F03
Brand: RC Factory
Crack WING "FUN series" Span: 750 mm Length: 340 mm Flight weight: 90 g Engine: 20 - 60W Regulator: 6-12A Servo: 2 x 4-6 g Battery: 250 2S Propeller: 6 x 3 - 7x3.5
Reference: F02
Brand: RC Factory
Crack WING "FUN series" Span: 750 mm Length: 340 mm Flight weight: 90 g Engine: 20 - 60W Regulator: 6-12A Servo: 2 x 4-6 g Battery: 250 2S Propeller: 6 x 3 - 7x3.5
Reference: F04
Brand: RC Factory
Crack WING "FUN series" Span: 750 mm Length: 340 mm Flight weight: 90 g Engine: 20 - 60W Regulator: 6-12A Servo: 2 x 4-6 g Battery: 250 2S Propeller: 6 x 3 - 7x3.5
Reference: F05
Brand: RC Factory
Crack WING "FUN series" Span: 750 mm Length: 340 mm Flight weight: 90 g Engine: 20 - 60W Regulator: 6-12A Servo: 2 x 4-6 g Battery: 250 2S Propeller: 6 x 3 - 7x3.5
Reference: F06
Brand: RC Factory
Crack WING "FUN series" Span: 750 mm Length: 340 mm Flight weight: 90 g Engine: 20 - 60W Regulator: 6-12A Servo: 2 x 4-6 g Battery: 250 2S Propeller: 6 x 3 - 7x3.5
Reference: E1201
Brand: DW Hobby - Dancing Wings Hobby
Super-Ray E12 DW Hobby FPV flying wing Kit only to climb Features: Size: 1100mmLength: 820mmFlight weight: 650g (900g max)
Reference: E0511
Brand: DW Hobby - Dancing Wings Hobby
Flying wing Rainbow V2 E05 800mm DW Hobby Kit only to climb. Features: Span: 800mmLength: 365mmFlight weight: 165g
Reference: E1101
Brand: DW Hobby - Dancing Wings Hobby
1060mm E11 DW Hobby Lighting EPP flying wing Kit only to climb. Features: Span: 1060mmLength: 550mmFlight weight: 260-280g
Reference: E1104
Brand: DW Hobby - Dancing Wings Hobby
1060mm E11 DW Hobby Lighting EPP flying wing PNP to mount kit. (with motor + ESC + servos) Features: Span: 1060mmLength: 550mmFlight weight: 260-280g
Reference: EFLU4250
Brand: E-flite
E-flite UMX F - 27 Evolution is fly ultra-micro powered the fastest to date! UMX F - 27 Evolution BNF Basic EFL4250 Size: 432 mmLength: 343 mmWeight: 91 g
Reference: 1-00981
Brand: Multiplex
Content KIT version: Elements of the fuselage, the canopy of the drift, and the stabilizer wings moulded ELAPOR®. Sheaths of wings in GFK, 2 engine supports with aluminum engine couples. All plastic parts, connections and other parts needed to assemble, pre-cut decoration Board and detailed instructions. Size: 783mmLength: 750mmMass: approx. 875g
Reference: E0704
Brand: DW Hobby - Dancing Wings Hobby
E07 Eagle 1430mm DW Hobby Kit to mount PNP (motor + ESC + servos) Features: Span: 1430mmLength: 760mmFlight weight: 550g - 580 g
Reference: E0701
Brand: DW Hobby - Dancing Wings Hobby
E07 1430mm DW Hobby Kit to mount Eagle Features: Span: 1430mmLength: 760mmFlight weight: 550g - 580 g
