Reference: ZMR250-POWERBOARD
Brand: ZMR250
Power Board with switches
With 2 switches for cutting or activate a LED and TX output video, camera... Size: 136 x 136mm (dimensions identical to flight CC3D for overlapping fixing card).
Banner
There are 11 products.
Reference: ZMR250-POWERBOARD
Brand: ZMR250
With 2 switches for cutting or activate a LED and TX output video, camera... Size: 136 x 136mm (dimensions identical to flight CC3D for overlapping fixing card).
Reference: ZMR250-CC3D
Brand: ZMR250
This map of stabilization has been created by the OpenPilot community. It is the most successful stabilization module of the market. From the SAP software, it is possible to access all the parameters of the map and refine your own settings. Gyroscope 3 axes and accelerometer 3 axes: MPU-6000USB connectivity for easy set-up on boardProduct content: 1 card...
Reference: ZMR250-UBEC
Brand: ZMR250
Intensity max 3A4 to 28V input voltageOutput voltage of 0.8 to 19VDimensions: 2.2x1.7x0.5 mm For example set the module to 12V by using a measuring device,and you can connect your FPV equipment directly on a 4, 5, lipo 6 s.
Reference: ZMR250-LEDR
Brand: ZMR250
Perfect for drone racer. Size: 170 x 15 mm Weight: 10g Connector: no, welding wire Cable 20cm Operating voltage: 11.1V (3s) Material: aluminium
Reference: ZMR250-LEDB
Brand: ZMR250
Size: 120 x 10 mm Weight: 10g or 7g according to the color Connector: no, welding wire Cord 15cm Power: 3W Operating voltage: 7.4 - 11.1V (2s / 3s) Max voltage: 13.5V Current: 280mA Material: aluminum plate Life expectancy: 50000 hours Operating temperature:-20 to 60 degrees Celsius
Reference: ZMR250-LEDW
Brand: ZMR250
Size: 170 x 15 mm Weight: 10g or 7g according to the color Connector: no, welding wire Cord 15cm Power: 3W Operating voltage: 7.4 - 11.1V (2s / 3s) Max voltage: 13.5V Current: 280mA Material: aluminum plate Life expectancy: 50000 hours Operating temperature:-20 to 60 degrees Celsius
Reference: ZMR250-PADR
Brand: ZMR250
Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V
Reference: ZMR250-PADV
Brand: ZMR250
Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V
Reference: ZMR250-PADBLA
Brand: ZMR250
Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V
Reference: ZMR250-PADBLE
Brand: ZMR250
Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V
Reference: ZMR250-FTDI
Brand: ZMR250
Programming for mini flight OSD controller card.