Reference: HT-560225
Brand: Hobbytech
Clutch bell 15 teeth and Bearings Hobbytech
Diameter 26mmBell 15 teeth with 2 bearings waterproof.
Banner
There are 111 products.
Reference: HT-560225
Brand: Hobbytech
Diameter 26mmBell 15 teeth with 2 bearings waterproof.
Reference: DYN1172
Brand: Dynamite
Coals 15T engine, spare part brand DYNAMITE for car. Voltage: 4.8 - 9.6 Cells: 4-8 or-Cd/Ni-MH or Lipo 2s Li - Po Diameter: 36mm Diameter axis: 3.175 mm Length axis: 15.5 mm Length: 50mm
Reference: KN-COMBO-B3
Brand: Hobbytech
CONTROLLER waterproof 50AmpKN-10BL50-WP-2 - 3s LiPo / NiMH cells 4-9-50Amp continuous / 300Amp in advanced-Compatible with brushless sensorless motors-Intended for: 1/10th track and off-road-Dimensions: 48.5 mm (L) * 38 mm (W) * 32 mm (H)-Decision-making TamiyaENGINE 1/10th BRUSHLESS SENSORLESSKN-3652-4600 -4-pole -9.5 T / 4600Kv-Sensorless motor Type 540...
Reference: KN-184216
Brand: Konect
Metal engine gable.Comes with 3x3 headless screwEach gable is marked with its number of teeth for easy identification.For 3mm diameter axis.
Reference: HT-560226
Brand: Hobbytech
Diameter 26mmBell 16 teeth with 2 bearings waterproof.
Reference: 30112750
Brand: Hobbywing
Carbon dimmer Quickrun WP 80A 1/10-1/8th crawler. -Power: 80A continuous/400A in Pointe -Power supply: from 5 to 9 NIMH elements or from 2 to 3S LIPO -BEC: 6V/7.4 V @ 3A (switch mode)
Reference: T49010175
Brand: T2M
Engine Rush Stock T2M TETC approved France - 17.5TTAMIYA Euro Truck Challenge France approved (TETC logo engraved on the engine cage)Tamiya 45057 (TBLE-02S) 45066 (TBLE-03) drive compatible
Reference: KN-COMBO-C1
Brand: Hobbytech
CONTROLLER waterproof 80Amp-2 - 3s LiPo / 6-9 cell NiMH-80Amp continuous / 520Amp in advanced- BEC: 6V-7, 4V / 3A -Compatible with brushless sensorless motors-Intended for: 1/10th track and cross-country, Short Course.-Dimensions: 49 x 39.5 x 34.7 mm-Decision-making DEANENGINE 1/10th BRUSHLESS SENSORLESSKN-3660SL-2750 -4-pole -2750Kv-Sensorless motor Type...
Reference: T4905/7
Brand: T2M
Coal type 550 electric motor.Compatible with most electric cars to the 1/10th scale RC type buggy, truggy and Monster Truck...Technical features: Type: Brushed (for coals) 550Voltage: 4.8 - 9.6Power supply: 4-8 or-Cd/Ni-MH or 2s Li - PoDimensions: Total diameter: 36mmAxle diameter: 3.2 mm (3, 175mm)The cage length: 57mmBetween axis of the mounting holes:...
Reference: HTR-1920002
Brand: Hobbytech
1/8 weights, 3 points Alu + Clutch Spring Kit Hobbytech HTR-1920002
Reference: KN-180111
Brand: Konect
11-tooth engine gable.For 1/8 electric TT. For 5mm axis.
Reference: 30112000
Brand: Hobbywing
Controller 60A 1/10 and 1/12 XERUN-XR10-JUSTOCKIdeal for Stock competition category 1/10.
Reference: KN-COMBO-C2
Brand: Hobbytech
CONTROLLER waterproof 80Amp-2 - 3s LiPo / 6-9 cell NiMH-80Amp continuous / 520Amp in advanced- BEC: 6V-7, 4V / 3A -Compatible with brushless sensorless motors-Intended for: 1/10th track and cross-country, Short Course.-Dimensions: 49 x 39.5 x 34.7 mm-Decision-making DEANENGINE 1/10th BRUSHLESS SENSORLESSKN-3660SL-3150 -4-pole -3150Kv-Sensorless motor Type...
Reference: TRX-3975R
Brand: Traxxas
Traxxas TRX-4 engine TRX-3975R
Reference: HT-560112
Brand: Hobbytech
Motor sprocket 12 teeth. For 1/8 electric TT. For 5mm axis.
Reference: KN-BRUSH40-CRAWBT
Brand: Hobbytech
Konect / Hobbywing 40A Drive waterproof for coal engine 1/10 special Crawler and Boats.Compatible Li-Po.Small footprint for high power and engine brake.Automatic gas stroke calibration, easy to use.Lipo cut, Fail-safe, Thermal protection.
Reference: T4900/52A
Brand: T2M
4 springs for Masselotte Clutch car 1/10.
Reference: KN-COMBO-C3
Brand: Hobbytech
CONTROLLER waterproof 80Amp-2 - 3s LiPo / 6-9 cell NiMH-80Amp continuous / 520Amp in advanced- BEC: 6V-7, 4V / 3A -Compatible with brushless sensorless motors-Intended for: 1/10th track and cross-country, Short Course.-Dimensions: 49 x 39.5 x 34.7 mm-Decision-making DEANENGINE 1/10th BRUSHLESS SENSORLESSKN-3660SL-3700 -4-pole -3700Kv-Sensorless motor Type...
Reference: KN-180113
Brand: Konect
Motor sprocket 13 teeth.For 1/8 TT electric. For axis 5mm.
Reference: KN-M550-16T
Brand: Hobbytech
Typical coal-fired motor 550, 16T.Compatible with most RC electric cars on a 1/10th scale type buggy, truggy or Monster Truck...
Reference: 56523
Brand: Tamiya
Set MFU MFC-03 Multifunction Tamiya for Euro Truck Reference 56523.For Tamiya truck.
Reference: KN-COMBO-B4
Brand: Hobbytech
CONTROLLER waterproof 50AmpKN-10BL50-WP-2 - 3s LiPo / NiMH cells 4-9-50Amp continuous / 300Amp in advanced-Compatible with brushless sensorless motors-Intended for: 1/10th track and off-road-Dimensions: 48.5 mm (L) * 38 mm (W) * 32 mm (H)-Decision-making TamiyaENGINE 1/10th BRUSHLESS SENSORLESSKN-3652-5400 -4-pole -9.5 T / 5400Kv-Sensorless motor Type 540...
Reference: KN-180114
Brand: Konect
Engine sprocket 14 teeth.For 1/8 TT electric. For axis 5mm.
Reference: 30502001
Brand: Hobbywing
Compatible:ESC Platinum brushless series for aircraft, XeRun series and EzRun brushless series for cars, ESC brushless Seaking Pro series for boats.
Reference: SV-15029
Brand: Siva
Compatible with most RC electric cars on a 1/10th scale type buggy, truggy or Monster Truck...
Reference: HT-560109
Brand: Hobbytech
Motor sprocket 9 teeth. For 1/8 electric TT. For 5mm axis.
Reference: KN-COMBO-M9
Brand: Hobbytech
Konect Variator 150Amp WP Konect Engine 2200KVProgramming map
Reference: KN-M540-55T
Brand: Hobbytech
Coal electric motor type 540, 55T.Compatible with most rc electric cars at 1/10th scale type Crawler...
Reference: KN-8BL80-SCT-WP
Brand: Konect
ESC 80A Waterproof Controller- Usable with engines brushless sensorless- Operation (forward with brake or forward and reverse with brake)- 4 starter modes (punch) ranging from low to very powerful - Several protections: cut-off (low voltage, overheating, radio losses and motor locking)- Splash and dust resistant- Programming via switch or with programming...
Reference: KN-184214
Brand: Hobbytech
Steel engine gable.Comes with 3x3 headless screw
Reference: R01250
Brand: Robitronic
Whether it's 1/10 track or 1/10 off-road, the Razer 50A is always the first choice when reliability, efficiency and durability are the top priorities. Various adjustment and programming options leave nothing to be desired.All of the controller's cables are already wired ready to be connected, no welding is required.Battery connection: DEAN T-takeEngine...
Reference: ET0300-15
Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage length: 60mmBetween axis of fixing holes: 25mm
Reference: KN-184213
Brand: Hobbytech
Steel engine gable.Comes with 3x3 headless screw
Reference: R01252
Brand: Robitronic
Whether it's 1/10 track or 1/10 off-road, the Razer 60A is always the first choice when reliability, efficiency and durability are the top priorities. Various adjustment and programming options leave nothing to be desired.All of the controller's cables are already wired ready to be connected, no welding is required.Battery connection: DEAN T-takeEngine...
Reference: ET0300-12
Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage length: 60mmBetween axis of fixing holes: 25mm
Reference: T49014
Brand: T2M
Rush T2M drive approved for the TETC (TAMIYA Euro Truck Challenge France)Compatible Li-Po.
Reference: KN-184217
Brand: Hobbytech
Steel engine gable.Comes with 3x3 headless screw
Reference: R01253
Brand: Robitronic
Whether it's 1/10 track or 1/10 off-road, the Razer 60A is always the first choice when reliability, efficiency and durability are the top priorities. Various adjustment and programming options leave nothing to be desired.All of the controller's cables are already wired ready to be connected, no welding is required.Battery connection: DEAN T-takeEngine...
Reference: 53068
Brand: Tamiya
Electric motor with coals type 540.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical specifications:Type: Brushed 540Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-Po
Reference: T49015
Brand: T2M
Rush T2M programming board approved for the TETC (TAMIYA Euro Truck Challenge France)Suitable for Rush controller TETC version.
Reference: KN-184218
Brand: Hobbytech
Steel engine gable.Comes with 3x3 headless screw
Reference: 30120402
Brand: Hobbywing
New version of the Fusion Hobbywing (motor combo + ESC for scale and crawler)The new FOC driver algorithm is more efficient and consumption is lower (30% compared to Fusion). The temperature is lower during low-speed climbs. Engine size type 540.Current: 60A – 200A (peak)Kv : 2300
Reference: 54358
Brand: Tamiya
Electric motor with coals type 540.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical specifications:Type: Brushed 540Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-Po
Reference: 500906264
Brand: Carson
Carson 70A drive waterproof for 1/10 coal engine.Compatible Li-Po 2S - 3S. Dean Tamiya adapter included.Small footprint for high power.Automatic gas stroke calibration, easy to use.Lipo cut, fail-safe, thermal protection.
Reference: KN-184219
Brand: Hobbytech
Steel engine gable.Comes with 3x3 headless screw
Reference: KN-40-540-1800-FUS
Brand: Hobbytech
- New special brushless crawler motor with integrated ESC- Ultra quiet, torquey, linear and very flexible.- Waterproof Combo
Reference: 51673
Brand: Tamiya
Electric motor with coals type 540.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical specifications: Type: Brushed 540Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-Po
Reference: KN-184220
Brand: Hobbytech
Steel engine gable.Comes with 3x3 headless screw