Banner
Kyosho 34502T1 – RC Drift Car Toyota Sprinter Trueno AE86 1/10 RWD RTR
The Kyosho 34501T1 is a 1/10 scale ready-to-run (RTR) RC car on a Fazer D2 2WD drift chassis. A realistic replica of the Toyota Sprinter Trueno AE86, it features a G22 motor, integrated gyroscope, and a polycarbonate body painted in the Toyota Trueno livery. Ideal for RC drifting and high-performance modeling.
Kyosho Fazer Drift D2 Readyset Toyota Sprinter Trueno AE86 RTR – Ref. 34501B
Dive into the world of RC drifting with the Kyosho Fazer Drift D2 Readyset Toyota Sprinter Trueno AE86, a 1/10 scale RTR (Ready to Run) radio-controlled car designed to deliver realistic drifting sensations right from the first use. Inspired by the legendary Toyota Sprinter Trueno AE86, this official Kyosho version combines iconic design, a high-performance chassis, and immediate handling.
A ready-to-run RC drift car.
The Fazer Drift D2 Readyset comes fully assembled and factory-decorated. It only requires the addition of a battery and batteries to be ready to go. Ideal for beginners and drift enthusiasts alike, this model provides an easy introduction to controlled drifting techniques.
Fazer Drift D2 chassis: stability and control
The Fazer Drift D2 chassis is specifically designed for drifting:
- Optimized transmission for gliding
- Drift tires included
- Independent suspension for realistic handling
- Mass distribution designed to facilitate long and controlled drifts
The precise steering and progressive controls offer excellent control, both indoors and outdoors on smooth surfaces.
Officially licensed Toyota Sprinter Trueno AE86 body
The Toyota Sprinter Trueno AE86 body faithfully reproduces the legendary Japanese car, famous in the world of drifting and JDM culture. Factory painted and decorated, it offers exceptional visual realism, perfect for fans of iconic models.
Kyosho Reliable Electronics
This model is equipped with Kyosho electronic components renowned for their reliability:
- High-performance electric motor
- Electronic dimmer included
- Precise steering servo
- 2.4 GHz radio for a stable and interference-free connection
Main features:
Scale: 1/10
Type: RC Drift Car
Transmission: Electric
Chassis: Kyosho Fazer Drift D2
Body: Toyota Sprinter Trueno AE86 under license
Level: Beginner to intermediate
Version: RTR – Readyset (ready to ride)
Technical specifications of the Fazer MK2 chassis:
- Length (including bodywork) 462 mm
- Width (bodywork * Excluding mirrors) 195 mm
- Width (chassis) 212 mm
- Height 134 mm
- Chassis height 12 mm (approximately)
- Wheelbase 260 mm (240-273 mm *Adjustable)
- Track (Front) 172 mm
- Track (Rear) 170 mm
- Gear ratio 9.1:1
- Track (Front/Rear) φ63 × 24 mm
- Weight 1450 g
- G22 engine
- Syncro KT-231P+ R/C System
Kit contents:
● Car assembled and radio installed
● Painted and decorated bodywork
● Syncro KT-231P+ Transmitter
● Cross wheel wrench
Required equipment (not included):
● 4 x AA batteries for the transmitter
● Propulsion battery (7.2V Ni-Mh or Li-Po 2S) DEAN connector
● Battery charger
Reference: T1006300D
Brand: T2M
Battery Ni-Mh 2400mAh 7.2V.Take Dean.6 flat elements.Dimensions: 135x46x24mm
Reference: GT-N802
Brand: GT-Power
The N802 from G.T. Power charger is a great choice if you want to charge your NiMh batteries or NiCd and ease with a power up to 20 watt.
Reference: GT-SD4
Brand: GT-Power
GT -Power SD4 LiPo/LiFe/ LiHV/ GT-Power Charger for LiPo, LiFe and Ni-Mh batteries with integrated balancer, on 100-240V mains. Features: Charges Lipo, LiFe 2S to 4S and NiMh 4S to 8S batteries. Power supply: AC 100-240v Charging Current: 0.5/1/1.5/2/2.5/3/3.5/4A Comes with a DEAN charging cord.
Reference: T1006500D
Brand: T2M
NiMH batteries taken Dean.Dimensions 135X45X23 mm.6 flat elements.
Reference: KN-LP2S3600
Brand: Hobbytech
Konect 7.4v 3600mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 3600 mah -Rate of discharge: 30 c continuous and 60 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 200 g With removable balancing intake protection.
Kyosho 34502T1 – RC Drift Car Toyota Sprinter Trueno AE86 1/10 RWD RTR
The Kyosho 34501T1 is a 1/10 scale ready-to-run (RTR) RC car on a Fazer D2 2WD drift chassis. A realistic replica of the Toyota Sprinter Trueno AE86, it features a G22 motor, integrated gyroscope, and a polycarbonate body painted in the Toyota Trueno livery. Ideal for RC drifting and high-performance modeling.
