HobbyTech OVER-D10 S15 1/10 Scale Drift Car RTR Pack

The OVER-D10 RTR Brushless is a ready-to-run (RTR) drift vehicle with rear-wheel drive (RWD), designed for RC drift enthusiasts who want a high-performance platform and an optimized design for a smooth and precise driving experience, specially designed for drifting and accessible to all!

Absolutely all accessories are included! High-end gyroscope, high-end servo, magnetic body mount, LED mount, LED kit, body accessories. This makes it the best value for money on the market.

Main features:

• KONECT KT3X 2.4GHz Transmitter & Receiver
• KONECT Lipo battery 5200mah 7.4V 100C 2S2P SHORTY
• KONECT LIPOMAX compact LiPo 2-3S 38W charger
• KONECT D2 Brushless Combo: 60Amp ESC and 3400kv motor
• KONECT Dual system KG1 gyroscope
• Steering servo 15 kilos KN-1509LPMG
• Pre-painted bodywork with LED kit included and installed!
• Multi-surface wheel set
• Magnetic body mounts
• G10 type composite chassis
• G10 type composite multi-position shock absorber mounts
• 2 transmission sprockets included (84 and 88T)
• 10 motor positions to adjust the center of gravity
• 7 battery positions (shorty or standard battery)
• Aluminum hydraulic shock absorbers for optimal performance
• Fully adjustable suspension arms
• Magnetic body mount included
• Fully equipped with ball bearings
• Realistic brake discs and calipers
• Adjustable Ackermann
• Ball bearings throughout the chassis

Konect D2 Brushless Combo: 60Amp ESC and 3400kv motor

Brushless speed controller specifications:
• Current: 60A
• Motor limit: 2S motor ≤ 6000 Kv and 3S motor ≤ 3500 Kv
• BEC output: 6V/3A
• Size: L46 x W36.5 x H35.5 mm
• Weight: 98.2g
• Programming: Button or LED board
• Adjustable settings: Mode, Drag Brake, Cutoff, Punch, and Braking Force

Brushless motor characteristics:
• 4-pole motor of 3400 kv (equivalent to a 10.5T)
• Sensorless
• Diameter: 36 mm
• Length: 50 mm
• Shaft diameter: 3.17 mm
• Axle Length: 17 mm
• Plug: PK 4mm male (already wired)
• Compatible with the Konect programming board

Konect Dual system KG1 gyroscope:

This Konect gyro is designed for RC drifting. The Konect KG1 is compact for easy mounting on your chassis and very user-friendly. Two driving modes are selectable via a switch. It's possible to reverse the steering servo direction and adjust the gain (either from the gyro itself or your 3-channel transmitter). Adjusting the endstops is quick and easy.

Steering servo, 15 kg:

With high torque and ultra-fast response time, this servo is perfectly suited to the demands of drifting. It guarantees precise and responsive steering control for perfectly controlled slides. The KN-1509LPMG is equipped with metal gears and its low-profile design makes it compatible with most drift chassis on the market.

Pre-painted S15 bodywork with LED kit included:

Designed at 1/10 scale, this special "Drift" bodywork faithfully reproduces as many details as possible. Its flared "rocket bunny" style fenders and rear wing give it a perfect finish.

• Bodywork in polycarbonate painted "Metallic purple"
• Chrome front and rear "Light buckets"
• Front and rear LED kit included and installed
• Spoiler, mirrors, windshield wipers, air intake

Customizable engine settings:

You can use one of 10 motor positions to optimize your riding experience and adapt the chassis behavior. A higher motor position promotes responsiveness and agility; a lower position increases stability and control.

Steering angle:

The OVER-D10 offers exceptional handling, perfectly suited to the demands of RC drifting. Thanks to its wide steering angle, it allows for tight turns and smooth transitions.

Shock absorbers:

Designed specifically for drifting, these shock absorbers offer a perfect balance between suppleness and responsiveness, ensuring optimal stability and a smooth response.

Items not included :

• 4 AA batteries for the transmitter