Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Free delivery all orders of $120 or more of eligible items across any product category qualify
Credit Card: Visa, MasterCard, Maestro, American Express
You can return any item purchased within 16 days of the delivery date
The ROGUE BUGGY V2 is HOBBYTECH's new brushless buggy. It features a brand-new 4-wheel drive chassis, allowing it to handle all terrains and weather conditions. Equipped with a 2200kv Konect brushless motor and a heatsink/fan for maximum reliability.
Supplied with a Konect waterproof motor.
Complete RTR version with lipo battery and charger.
The ROGUE BUGGY V2 is HOBBYTECH's new 4x4 buggy in a brushless version. It features a unique 4-wheel drive chassis, allowing it to handle all terrains and weather conditions.
NEW FEATURES:
• Front upper tie rods 4 mm - adjustable camber
• Rear upper sway bars 4mm - adjustable camber
• New caliper system + reinforced front hub carrier
• New reinforced rear spindles
• 8x16x5mm bearings in the front and rear spindles for the wheel axles
• New KONECT 15kg metal gear servo
• New body design
• New Velcro-type bodywork attachment
This buggy has a 4-wheel drive transmission, Konect by Hobbywing electronics and is equipped with all-aluminum big bore shock absorbers.
Konect 2200kv brushless motor with a heatsink and fan to maximize reliability.
Technical specifications:
4x4 driveshaft transmission
Reinforced lower triangulation
3 Steel gear differentials
Big bore aluminum shock absorbers
Triangle axle support Aluminum
100% ball bearings
Waterproof radio box
Painted and decorated bodywork
Ultra-resistant calipers and rocket carrier
Water-resistant receiver housing
KT3X radio system
Konect 3652 4-pole 2200kv brushless motor
60A brushless controller (XT60) accepts 2S and 3S LiPo batteries
Konect 15kg -0.18s Servo with metal gears
Montesr Truck type tires
Instruction manual
1 x 2S 4200mAh battery included
1 LIPO220 charger included
Dimensions:
Maximum height: 215 mm
Length: 490 mm
Wheelbase: 329 mm
Front track: 300 mm
Rear track: 310 mm
Front ground clearance: 48 mm
Rear ground clearance: 50 mm
Total weight: 2330 gr
Required items not included:
- 4x R6 (AA) batteries for the radio
GT -Power SD4 LiPo/LiFe/ LiHV/ GT-Power Charger for LiPo, LiFe and Ni-Mh batteries with integrated balancer, on 100-240V mains. Features: Charges Lipo, LiFe 2S to 4S and NiMh 4S to 8S batteries. Power supply: AC 100-240v Charging Current: 0.5/1/1.5/2/2.5/3/3.5/4A Comes with a DEAN charging cord.
Konect 7.4v 5200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g With removable...
Konect 7.4v 4200mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g With removable...
Integrated 220V alternative power chargerRecommended to charge Li-PO, Li-ION, Li-FE (2S to 3S: 6.6V to 11.1V), and Ni-MH, Ni-CD (4-8S: 4.8V to 9.6V).
