Engraving-modeling box with MICROMOT 50/E Proxxon

Engraving set for modelers with DRILL-fresher MICROMOT 60/E

• To pierce, mill, sand, polish, brush, cut and burn. For the processing of steel, precious metals, glass, ceramics, plastic and minerals.
• With low voltage safety voltage. Suitable for working with cooling liquid (polishing and cutting under liquid).
• For electronics do-it-yourselfers, modellers, precision mechanics, goldsmiths, opticians, sculptors, pedicures, dentists, tool and mold manufacturing.

MICROMOT 60/E strawberry drill:

Electronic progressive adjustment of the rotation regime and high drive power at low speeds. TOOL holders with MICROMOT steel clamps (1 exhibit 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm).

Technical data:

Continuous current 12 - 18 V. 40 W. 5,000 - 20,000/min.
Length of 220 mm.
Weight 230 g.

Comes with 34 industrial and dental quality accessories:

1 diamond millstone on stem, 1 fine strawberry, 1 micro-drill 0.5 and 1 mm, 1 brass brush, 4 corindon stem wheels (cylinder, ball, wheel and cone), 1 elastic polisher, 2 discs to grind in corindon and 2 in silicon carbide, 20 wheeled discs and 1 tool holder. In addition, 6 MICROMOT clamps from 1 to 3.2 mm. With transformer for sector 230 V (12 V, 1 A). Delivered in an elegant sturdy plastic briefcase.

The microMOT steel clamps are soaked, giving them a high and constant elasticity. They retain the necessary precision even after long use (incomparable to unstipped clamps with 4 slots or brass or aluminum clamps. The triple slit, which is much more difficult to achieve than a quadruple slot, provides a better seating. This is particularly important for the centering of small diameter stems.

Note:

The speed control of our 12-volt units only works with unstabilized power supplies (e.g. all MICROMOT transformers). A connection to stabilized power supplies is possible. However, the devices then operate at maximum speeds (this also applies to battery power).

Appropriate accessories:

FS foot switch - NO. 28700
Work with your hands free. For all devices with a European plug (class 2) and a power of up to 500 W max. Also suitable for set-up devices. A fibreglass-reinforced NYLON case. Cordon 250 cm for sector 230 V. 50 cm of cable out. For 12V devices, the switch can be plugged into the transformer.