The Yucatan is a high-end "Ready-to-Run" 1:8 scale crawler that is based on the successful ABSIMA CR3.4 chassis. All the features that made the success of its little brothers on a 1/10 scale (Sherpa, Khamba) have been adopted. Thanks to the 1:8 chassis, even more extreme maneuvers are possible and due to the size of the body, the details could be highlighted even better, which gives the vehicle a beautiful driving image.
Characteristics:
- RTR crawler assembled and ready to ride - 6-way remote control already installed - Hobbywing 80A Waterproof ESC special crawler speed controller - Coal engine type 775 - Box of Speed 2 Gears - Bridge remote lock differentiated front/rear - Portico bridge allowing a significant ground grade - Metal spar type chassis - 4x4 gimbal transmission - Fully on bearing - Telescopic gimbals - Aluminum Shock Absorber and Links - BeadLock type wheels - Steering angle 43° - Complete LED kit with turn signal - Many Body Accessories
Size:
- Length: 635 mm - Width: 290 mm - Height: 300 mm - Ground clearance: 95 mm - Wheelbase: 370 mm - Weight: 4200g - Angle of approach: 65° - Starting angle: 48° - Steering angle: 43° - Wheels: 12mm Hex Beadlock 2.2" - Tires: 50x132mm - Shock absorber length: 100 mm - Transmission: 2 speeds (Hi 1/15.1 / Lo 1/37.1) - No gear: Module 0.8 / 32dp - Pinion 16T / Main Crown 44T
Necessary not included:
4 x AA batteries for remote control 1 x Charger 1 x 2S or 3S Lipo Battery DEAN Plug
SD4 GT-Power LiPo/LiFe/NiMh charger
Charger for LiPo, LiFe, and Ni-Mh batteries with balancer built-in, 100-240V mains.
Features: Load batteries Lipo, LiFe 2 S 4 S and NiMh 4 S to 8 S.Power supply: AC 100-240vLoad current: 0.5/1/1.5/2/2.5/3/3.5/4A
Comes with a charge DEAN lead.
Konect 7.4v 5200mah battery taken DEAN.
-Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g
With removable balancing intake protection.
Konect 7.4v 3600mah battery taken DEAN.
-Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 3600 mah -Rate of discharge: 30 c continuous and 60 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 200 g
With removable balancing intake protection.
Konect 7.4v 4200mah battery taken DEAN.
-Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g
With removable balancing intake protection.
SD6 GT-Power LiPo/LiFe/NiMh charger
Charger for LiPo, LiFe, and Ni-Mh batteries with balancer built-in, 100-240V mains.
Features: Load batteries Lipo, LiFe 2s to 6s and 4S NiMh 10s.Power supply: AC 100-240vMax power: 50WCharge current: 1/2/4 / 6A
Comes with a charge DEAN lead.