Truck scale Puzzle 3D wood UGEARS

Difficulty: 3 (Expert)

Age: 14 years

The truck UGM-11 with Scale

The four-cylinder engine is powered by a crankshaft that draws its power from a drive shaft fully functional shot by a rubber band motor and a gear system.

The UGM-11 truck has 3 modes of operation, forward, backward and stop, all controlled by a gear shift lever on the side. When this lever is on stop mode, it is possible to start the engine 4 cylinders and thus observe the 4 pistons move under the hood. You can also take a look at the cabin door, you will notice the fully functional steering wheel connected to the front wheels via a steering column. You'll also see by pressing the front of the truck suspensions only made of wood.

The elastic engine is of type meandered with a lever on top of the cabin mechanism. The accelerator (gas) pedal increases the engine when pressed on it, which significantly increases the realistic aspect of this construction kit.

The fire escape can be unfolded up to 70 cm and is controllable in several points. Press the lever to lift the scale up, scale is positioned on a swivel plate to the left or to the right. You can set the position with a special key. Slide the three elements of the scale to open it up, then climb up and you will get a crane with a hook at the end. There is even a small scale to help firefighters up in seconds on the platform.

A assemble yourself,. without the use of glue.

Model dimension: 34.5x20x12.5 cm
Number of rooms: 537

Assembly: about 15 h to 20 h