Banner
Off-road buggy 1/8 brushless Kyosho inferno MP9e EVO.
New RTR version Mounted with 2300kV brushless motor, waterproof dimmer and 2.4GHz radio
This chassis based on the competition version of the MP9E.
INFERNO MP9e EVO READYSET EP (KT331P/2.4Ghz)
The MP9E is now available in Readyset version! This fully assembled version uses the proven mechanics of the MP9 used in competition. The MP9E EVO Readyset will be equipped with a KT331P radio set and its receiver in 2.4Ghz and a 120A Brainz 8 motor/drive set consisting of a Torx 8 - 2000Kv motor and an R8 drive, in waterproof version. This set accepts batteries from 2 to 4S. The management is entrusted to a new generation servo KS-5031-09MW. This MP9E EVO Readyset is equipped with Big Bore aluminum shock absorbers with threaded body to adjust the ground clearance very precisely. The shock absorber brackets, suspension wedges and chassis, are made of quality aluminum alloy and anodized gun metal. All the rods are reversed pitch to adjust the settings to the tracks used. The front gimbals are CVKINETIC, the anti-roll bars mounted at the front and rear.
New look
New tires
New 2300kv motor
New 5mm shock absorber mounts
Technical characteristics of the chassis :
Length : 490mm
Width : 307mm
Height : 180mm
Ground clearance : 28mm
Wheelbase : 325mm
Track (Av/Ar) : 254mm
Tires (Av/Ar) : 116 x 44mm (Av/Ar)
Transmission ratio : 12.6：1
Weight : 3,370g approx.
Engine : Torx 8 4068 2300Kv
ESC : HOUSE TORX 8 Brushless
Start-up kits :
4 Type AA batteries (4 for the transmitter.) Lipo battery 2-4S, suitable charger.
Reference: GT-C607D
Brand: GT-Power
Charger-unloader, for NiMh, NiCd, Li-Ion, LiPo, LiFe batteries, LiHV and Pb with balancer, mains and 12 volts. Power 80W!Comes with various adapters.
Reference: KN-LP2S5200
Brand: Hobbytech
Konect 7.4v 5200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g With removable balancing intake protection.
Reference: KN-LP2S3600
Brand: Hobbytech
Konect 7.4v 3600mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 3600 mah -Rate of discharge: 30 c continuous and 60 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 200 g With removable balancing intake protection.
Reference: KN-LP2S4200
Brand: Hobbytech
Konect 7.4v 4200mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g With removable balancing intake protection.
Off-road buggy 1/8 brushless Kyosho inferno MP9e EVO.
New RTR version Mounted with 2300kV brushless motor, waterproof dimmer and 2.4GHz radio
This chassis based on the competition version of the MP9E.
