List of products by brand GT-Power

Mains charger 5 a.

Dimensions: 220x180mm Weight: 80g

Dimensions: 300x225mm Weight: 123g

GT Power servo tester. To test 3 servos both for CCPM helicopters for example.

To measure the rpm of the propellers and blades, from 2 to 9 blades and stores the values recorded Maximum 99999 RPM

Volt - Reyes time Volt - Minimum Amps - in real time Amps - advanced Watts - in real time Watt - Peak Amps/hour Watts/hour

8 LED with G.T. Power Control Board. * Supply voltage: 4V - 6V* Current: 30mA* Platinum size: 35 x 24 x 8mm* Led cable length: 600mm* Weight: 35 g* Size LED (diameter x length): 5x8mm Includes: * 1 x Platinum control* 2 x white LEDs fixed* 1 x green LED on fixed (nav)* 1 x red LED on fixed (nav)*...

Charger-unloader, for NiMh, NiCd, Li-Ion, LiPo, LiFe batteries, LiHV and Pb with balancer, mains and 12 volts. Power 80W!Comes with various adapters.

The new electronically controlled tire warmers  Feature: -For car touring 1/10 / possibly some models 1/10 offroad -Degree Celsius / Fahrenheit selectable -Selectable minimum temperature -Adjustment of brightness and contrast -Setting the temperature front / rear -Temperature controlled by micro...

2 spotlights powerful for airplane, helicopter, car or boat.

Size: 13 x 31 x 43 mmInput voltage: 0.5V - 4.50V by cell The low voltage alarm setting range: Off or 2.7V to 3.8V If the voltage falls below the set value, the buzzer will sound with a red LED. The preset value is 3.3V and can be adjusted by pressing the set button.

Dimensions: 185x80x80 mm

In addition, this switch has a built-in battery NiMh/NiCd or LiPo battery controller. You can check the remaining capacity of your battery. Has cut in Li - Po mode security to protect your battery.

8 spotlights powerful for airplane, helicopter, car or boat.

The N802 from G.T. Power charger is a great choice if you want to charge your NiMh batteries or NiCd and ease with a power up to 20 watt.

Features: * Supply voltage: 4V - 6V* Material: plastic* Bar length: 11mm Includes: * 1 x Platinum control* 1 x set of plastic spots

Size: 12 x 25 x 40 mmInput voltage: 0.5V - 4.50V by cell The low voltage alarm setting range: Off or 2.7V to 3.8V If the voltage falls below the set value, the buzzer will sound with a red LED. The preset value is 3.3V and can be adjusted by pressing the set button.

Features: * Supply voltage: 4V - 6V* Material: plastic* Bar length: 11mm Includes: * 1 x Platinum control* 1 x plastic spots set chrome

GT -Power SD4 LiPo/LiFe/ LiHV/ GT-Power Charger for LiPo, LiFe and Ni-Mh batteries with integrated balancer, on 100-240V mains. Features: Charges Lipo, LiFe 2S to 4S and NiMh 4S to 8S batteries. Power supply: AC 100-240v Charging Current: 0.5/1/1.5/2/2.5/3/3.5/4A Comes with a DEAN charging cord.

SD4LiPo/LiFe/NiMh charger Charger for LiPo, LiFe and Ni-Mh batteries with balancer built-in, 100-240V mains. Features: Load batteries Lipo, LiFe 2 S 4 S and NiMh 4 S to 8 S.Power supply: AC 100-240vCharge current: 1 A / 2A / 3A Comes with a charge DEAN lead.

{5} {6} {7}{8}{9}{10} {11}

Charger/UNloader PROQUAD 4 outputs for accus NiMh, NiCd, Li-Ion, LiPo , LiFe and Pb with built-in swing, on 12 volts or 240W (4x100w).With 4 independent circuit, the power is 100W per circuit or 400W in total.The ProQuad can charge up to 4 x 15 NiCd/NiMH cells or 4 x 6S Li-Po. Each output can...

Loader-unloader for batteries NiMh, NiCd, Li-ion, LiPo, LiFe, LiHV and Pb with swing, on sector and 12 volt. Power 100W / 10A! Comes with various adapters.

This fast charger/unloader features an integrated balancing circuit electronically managed by a high-performance microprocessor with specialized software.

58 recorded car sounds Multiple lighting effects

Dimensions: 240x65x180mm

Charger X4 MINI GT Power 4 outputs for accus NiMh, NiCd, Li-Ion, LiPo , LiFe, LiHV and Pb with integrated swing, on 12 volts or 240W (4x100w).With 4 independent circuit, DC Max: 100W x4 / AC Max: 200W Power intelligently allocated between the 4 outputs.

Charger X4 MINI GT Power 2 outputs for accus NiMh, NiCd, Li-Ion, LiPo , LiFe, LiHV and Pb with integrated swing, on 12 volts or 240W (2x100w).With 2 independent circuit, DC Max: 100W x2 / AC Max: 100W Power intelligently allocated between the 2 outputs.

For LiPo/LiFe/LiHv/LiIon/NiMh/NiCd/Pb batteries- Input voltage :D C 12-26V- Circuit power: Max. charge 300W                                 4W Discharge- Charging current: 0.1-12.0A- Discharge current: 0.1-3.0A

The perfect accessory for cleaning RC cars. Combining power and practicality, our air blower promises efficient and gentle cleaning.

GT Power's sound module lets you mimic the roar of a large engine on your RC model. This module has a memory with 58 different engine sounds .

With the GT-Power 2S/3S LiPo Battery Alarm, you will be informed when your battery is nearing the end of its useful life, making it easier to find your lost RC model. The alarm is equipped with a switch that allows you to select the number of cells in your LiPo, 2S or 3S battery.