List of products by brand Multiplex

A highly modernized glider, a natural evolution of the famous EasyGlider from the same brand. An extremely high-performance electric glider with a T-tail, cockpit and transparent canopy. KIT VERSION: to be assembled and equipped.

Equivalent to Hitec 7985MG.

Folding propeller blades (pair) 9" x 6"

Zacki ELAPOR® super liquid was specially developed for bonding ELAPOR® parts together and for use with the Zacki ELAPOR® fill up smoothing compound. Of course, you can also bond other materials together, or to ELAPOR® parts. However, like all other calcium carbonate-based adhesives, Zacki is not...

New Multiplex Zacki 2 glues adapted for model making, and in particular for Elapor Multiplex foams. You can of course also use this glue for other materials, with the exception of PTFE and Silicone. Stores easily UV resistant, does not yellow, always stays clear Contents: 20 g

Cable with original Multiplex female battery plug for a secure contact and good grip.

Cable with original Multiplex male battery plug for a secure contact and good grip.

Multiplex pilot bust, 95mm high.

The Multiplex Fox, a small, hand-launched glider molded from lightweight Elapor, is the perfect beginner model for young children. Easy to assemble, elegant, and robust, it will delight your kids!

Complete version with 2.4GHz radio control, battery, charger... The new ' EasyGlider 4 ' version, manufactured in Germany, includes: - A new wing of the same geometry, but without a cowling, with a removable square GFK spar.

A superb 3D radical aerobatic model treated as a semi-scale model! RR (PNP) version : assembled and equipped with electronics (motor servos, ESC).

The Multiplex Heron is a high-performance motor glider with a T-tail and flaps . Its elegant, thin-profile wings allow it to exploit even the slightest lift , and if necessary, you can easily climb back up thanks to the PERMAX brushless motor . RR VERSION: it is necessary to add the battery,...

Contents of the KIT version: Fuselage, canopy, wing, fin and stabilizer components molded in ELAPOR®. Wing sleeves in GFK, 2 engine mounts with aluminum engine mounts. All plastic parts, connectors and other parts needed for assembly, pre-cut decoration board and detailed instructions. Wingspan:...

The new 2017 version of the most popular electric motor glider! All modelers are familiar with the superb flying qualities of the Multiplex EasyGlider . It's a fantastic machine for beginners, for discovering slope soaring, gliding, and basic aerobatics. It's robust, simple, and spare parts are...

The new 2017 version of the most popular electric motor glider! All modelers are familiar with the superb flying qualities of the EasyGlider Multiple x. It's a fantastic machine for beginners, for discovering slope soaring, gliding, and basic aerobatics. It's robust, simple, and spare parts are...

The RR version of the EasyStar 3 of Multiplex consists of: fully assembled foam pieces, applied decorative sheet,servosHR, SR and QR assembled, with L'EasyStar is the ideal entry-level model - built quickly and easy to master. You can learn to fly wonderfully with this 'star', which has received...

New livery designed by Mirco Pecorari (Aircraftstudiodesign®) for the timeless TwinStar Multiplex! Contents of the KIT version: Fuselage, canopy, wing, fin and stabilizer components molded in ELAPOR®. Wing sleeves in GFK, 2 engine mounts with aluminum engine mounts. All plastic parts, connectors...

The Heron de Multiplex is a high-performance glider with T-tailings and shutters. Its elegant wings fine profile and carrier allow him toexploitthesthes whatsods and if necessary, you can easily reassemble thanks to the perMAX brushless engine.VERSION Kit: Is delivered, the cell to be mounted...

FUNNYSTAR by Multiplex is the perfect model to start in the world of modeling.It lends itself to outdoor flying as well as indoor flights (in the gymnasium and gym).

MULTIFLIGHT Multiplex Flight Simulator with Connection Stick for M-Link Multiplex Radio (Smart SX, Cockpit SX, Royal Pro, Profi TX).

The Funcub Multiplex "first generation" is an easy, light, very agile and pleasant machine to drive. The FUNCUB Next Generation is a all-new machine, which takes up and improves the qualities of the previous model.Wingspan 1450 mm Total length 1050 mm In-flight weight approximately: 1380 g RC...

The FunRay By Multiplex is an elegant motor glider, of a new kind in the range of models of the German manufacturer. FunRay takes the legendary flying qualities of multiplex models, combining robustness and lightness.RR version: comes with HITEC servos installed and brushless propulsion (without...

MULTIPLEX transport backpack for gl hover models up to 2.4 m wingspan, suitable for example for:EasyGlider 4, SOLIUS, HERON, FunRay and similar models with removable horizontal stabilizer.Dimensions: 1270x150x270 mm

The Lentus is the latest addition to MULTIPLEX. This model has been designed to evolve in both thermal and slope flight.RR VERSION: It is necessary to add the battery, charger and transmitter/receiver set 5 lanes or more.

MULTIPLEX transport backpack for glider models up to 3.2 m wingspan, suitable for example for:Lentus, Antaris and similar models with removable horizontal stabilizer.Dimensions: 1570 mm

The Lentus is the latest addition to MULTIPLEX. This model has been designed to evolve in both thermal and slope flight.VERSION Kit: Only the cell and accessories are delivered. It is necessary to add all the electronics.

Optional return train for Lentus Multiplex.Requires an HS-85 servo #112085

The RTF version of the Multiplex EasyStar 3 consists of: fully assembled foam pieces, applied decorative sheet,HR servos, SR and QR assembled, with L'EasyStar is the ideal entry-level model - built quickly and easy to master. You can learn to fly wonderfully with this 'star', which has received...

New decoration by Mirco Pecorari (Aircraftstudiodesign®) for the timeless TwinStar Multiplex!RR version:Comes with engines, esc and servos installed. All you need is the LiPo 3S 3000mAh battery (with MPX socket) as well as your transmitter and receiver.Wingspan: 1420 mmLength: 1085 mmIn-flight...

Propeller for electric motorization 13x4. APC

A superb aerobatic model treated in semi-model!Multiplex Tommy Jr. is a recreational biplane whose lines are inspired by the American amateur-built biplane designed by Meyer Aircraft Company. Version RR : assembled and equipped electronically (servo motor, ESC).

Electric twin-engine semi-mock-up of the Learjet business jet by Multiplex, very attractive and easy to fly.Version RR : assembled and equipped electronically (servo motor, ESC).

MULTIFLIGHT Multiplex Flight Simulator with Connection Stick with Multiplex Smart SX Radio.

5-channel 2.4 GHz M-LINK receiver with UNI plugs. Thanks to its compact housing, small footprint and inline plugs, it fits perfectly into smaller models.

12x8" three-bladed propeller for Multiplex Extra 300S.

The FunWing Kit+ Multiplex flying wing is the ideal companion, really comfortable on slopes and particularly robust thanks to the combination of materials: EPP on the leading edge and ELAPOR wings! (Kit Plus version)Wingspan: 1.16mTotal length: 0.62mWeight in flying order: 485 gr.

Discover the joy of easy flying with our Pacer! Specially suitable for beginners, easy to carry and so friendly!The new MULTIPLEX PACER RR is a model inspired by the famous Piper PA 20 Pacer.

The RTF version of the Multiplex EasyStar 3 consists of: fully assembled foam parts, applied décor sheet,HR, SR and QR servos assembled, with The EasyStar is the ideal entry-level model - built quickly and easy to master. You can learn how to fly wonderfully with this "star", which has received...

Full version with 2.4Ghz remote control, battery, charger...The new version 'EasyGlider 4' , made in Germany, includes: - A new wing of the same geometry, but without a cowling, with removable square GFK spar.