Banner
The ROGUE BUGGY Version 2.0 is HOBBYTECH's new brushless buggy. It features a brand-new 4-wheel drive chassis, allowing it to handle all terrains and weather conditions. Equipped with a 2200kv Konect brushless motor and a heatsink/fan for maximum reliability.
Supplied with a Konect waterproof motor.
Complete RTR version with lipo battery and charger.
The ROGUE BUGGY Version 2.0 is HOBBYTECH's new 4x4 buggy in a brushless version. It features a brand-new 4-wheel drive chassis, allowing it to drive on all terrains and in all weather conditions.
This buggy has a 4-wheel drive transmission, Konect by Hobbywing electronics and is equipped with all-aluminum big bore shock absorbers.
Konect 2200kv brushless motor with a heatsink and fan to maximize reliability.
Version 2.0 Evolution:
• Front upper tie rods 4 mm - adjustable camber
• Rear upper tie rods 4mm - adjustable camber
• New caliper system + reinforced front wheel carrier
• New reinforced rear spindles
• 8x16x5mm bearings in the front and rear spindles for the wheel axles
• New KONECT 15kg metal gear servo
• New body design
• New Velcro-type bodywork attachment
Technical specifications:
4x4 driveshaft transmission
Reinforced lower triangulation
3 Steel gear differentials
Big bore aluminum shock absorbers
Triangle axle support Aluminum
100% ball bearings
Waterproof radio box
Painted and decorated bodywork
Ultra-resistant calipers and rocket carrier
Water-resistant receiver housing
KT3X radio system
Konect 3652 4-pole 2200kv brushless motor
60A brushless controller (XT60) accepts 2S and 3S LiPo batteries
Servo Konect 15kg metal gears
Montesr Truck type tires
Instruction manual
1 x 2S 4200mAh battery included
1 Konect LipoMax 3A charger included
Dimensions:
Maximum height: 215 mm
Length: 490 mm
Wheelbase: 329 mm
Front track: 300 mm
Rear track: 310 mm
Front ground clearance: 48 mm
Rear ground clearance: 50 mm
Total weight: 2330 g
Required items not included:
- 4x R6 (AA) batteries for the radio
Reference: GT-C607D
Brand: GT-Power
Charger-unloader, for NiMh, NiCd, Li-Ion, LiPo, LiFe batteries, LiHV and Pb with balancer, mains and 12 volts. Power 80W!Comes with various adapters.
Reference: GT-SD4
Brand: GT-Power
GT -Power SD4 LiPo/LiFe/ LiHV/ GT-Power Charger for LiPo, LiFe and Ni-Mh batteries with integrated balancer, on 100-240V mains. Features: Charges Lipo, LiFe 2S to 4S and NiMh 4S to 8S batteries. Power supply: AC 100-240v Charging Current: 0.5/1/1.5/2/2.5/3/3.5/4A Comes with a DEAN charging cord.
Reference: KN-LP2S5200
Brand: Hobbytech
Konect 7.4v 5200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g With removable balancing intake protection.
Reference: XT60DEAN
Brand: DYS
This Dean Male to female XT60 adapter allows for example to connect a battery in Dean take on a male XT60 connector.
Reference: KN-LP2S4200
Brand: Hobbytech
Konect 7.4v 4200mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g With removable balancing intake protection.
Reference: GE3-5300-2D-60-T03
Brand: Gens ACE
Reference: T1269
Brand: T2M
Integrated 220V alternative power chargerRecommended to charge Li-PO, Li-ION, Li-FE (2S to 3S: 6.6V to 11.1V), and Ni-MH, Ni-CD (4-8S: 4.8V to 9.6V).
Reference: T1245
Brand: T2M
Allows you to quickly charge a pack of Li‐Po batteries of 2 to 4 elements, the most commonly used in model making.• Power supply: 100 to 240V (AC cable included)• Charging current: 4A (50W power)• Recommended for Li‐Po batteries with a minimum capacity of 2,000mAh
Reference: T1350002C
Brand: T2M
Accu T2M Powerhouse 7.4v 5000mah 50C DEAN plug.
The ROGUE BUGGY Version 2.0 is HOBBYTECH's new brushless buggy. It features a brand-new 4-wheel drive chassis, allowing it to handle all terrains and weather conditions. Equipped with a 2200kv Konect brushless motor and a heatsink/fan for maximum reliability.
Supplied with a Konect waterproof motor.
Complete RTR version with lipo battery and charger.
