Truck tank Puzzle 3D wood UGEARS

Difficulty: 3 (Expert)

Age: 14 years

The truck UGM-11 with Cistern

The four-cylinder engine is powered by a crankshaft that draws its power from a drive shaft fully functional shot by a rubber band motor and a gear system.

The UGM-11 truck has 3 modes of operation, forward, backward and stop, all controlled by a gear shift lever on the side. When this lever is on stop mode, it is possible to start the engine 4 cylinders and thus observe the 4 pistons move under the hood. You can also take a look at the cabin door, you will notice the fully functional steering wheel connected to the front wheels via a steering column. You'll also see by pressing the front of the truck suspensions only made of wood.

The elastic engine is of type meandered with a lever on top of the cabin mechanism. The accelerator (gas) pedal increases the engine when pressed on it, which significantly increases the realistic aspect of this construction kit.

The tank is equipped with a unique opening mechanism. It is designed to receive a standard can type 0.33 l. turn the "cap" of the tank and the tank opens in a surprising way. The tank has an open and aggressive look that even the casual observer will appreciate.

A assemble yourself,. without the use of glue.

Model dimension: 33x18x12.5 cm
Number of rooms: 594

Assembly: about 15 h to 20 h